GUANGZHOU OBVIOUS LED DISPLAY Co,.ltd

Source: GUANGZHOU OBVIOUS LED DISPLAY Co,.ltd

The wet and rainy weather is a big challenge to the LED screen. How to waterproof and moisture-proof in the rainy season is the problem that the outdoor LED screen faces to be solved. Because the environment of the outdoor LED screen itself is more complicated than that of the indoor, it is not only necessary to consider the humidity It is necessary to do daily maintenance work such as waterproofing.

A good sealing installation can help the display screen to reduce the risk of water ingress. Regularly clean the dust attached to the inside and outside of the display screen, and it can also help the display screen to dissipate heat better and reduce the adhesion of water vapor. And the entry of moisture may cause the LED screen to die, so in the production and construction process of the outdoor full-color LED screen, it is necessary to do waterproof prevention work.

Waterproofing in the production process When making and producing LED screen, the PCB board should be treated with anti-corrosion, such as coating the surface with three anti-paint, etc., and the power supply and power cord should use high-quality accessories.

The selected waterproof box has better sealing performance, and the screen body must reach IP65. Welds are the most easily corroded places, so we should pay attention to the protection work, especially the frame, which is easy to rust, so we should do a good job of anti-rust treatment. Secondly, for different unit board materials, professional waterproof coatings need to be used, and secondly, whether there is a waterproof groove on the unit board kit, and finally, attention should be paid to the waterproof problem of the backplane of the outdoor LED screen, because in the process of using the display In the middle, the back panel LED screen is not only heat dissipation, but also has great convenience in dealing with waterproof performance. When dealing with the waterproof coating on the back, pay more attention to the waterproof performance of the aluminum-plastic panel of the small strip display on the back. Use an electric drill to design a row of drains under the aluminum-plastic panel, which is not only conducive to the waterproofing of the display, but also to the heat dissipation of the display.

Waterproofing work for on-site installation and construction In the specific construction site, the structure design should be combined with prevention and drainage. After the structure is determined, according to the characteristics of the structure, it can be considered to have a hollow foam tube structure, a small compression set rate, and a large elongation at break. Strip material, after selecting the sealing strip material, it is necessary to design the appropriate contact surface and contact force according to the characteristics of the sealing strip material, so that the sealing strip is extruded to a dense state. In some installations, waterproof grooves and other locations, do key protection to ensure that there is no accumulation of water inside the display.

Attention during daily use Finally, for outdoor screens, it needs to be used frequently, because the working screen itself will generate some heat, which can evaporate some water vapor, greatly reducing the possibility of short circuit caused by humidity. Lianchengfa, a brand manufacturer of LED screen screens, recommends that you use the LED screen display at least once a week during the rainy season, and turn on the screen at least once a month for more than 2 hours.

4.the correct remedy for water into the LED screen:

Use a fan or other tools at the fastest speed to completely dry the water-infused LED screen screen, and energize the completely dried screen body to age.

Five, the operation method of power-on aging

The brightness (full white) is adjusted to 10%, and the power is aged for 8-12 hours.

Adjust the brightness (full white) to 30%, power on and age for 12 hours.

Adjust the brightness (full white) to 60%, power on and age for 12-24 hours.

Adjust the brightness (full white) to 100%, power on and age for 8-12 hours.

Matters needing attention Do not put the LED screen body that has entered the water into the air box, it is easy to suffocate the LED lights.

When the warehouse is filled with water, the air box may enter the water, and all the air boxes need to be exposed to the sun to prevent the water from volatilizing into the LED screen after packing.

If the LED screen screen with water is not dealt with in time, it may affect the stability of the screen body. During emergency treatment, the phenomenon of continuous dead lights may occur after the screen body is powered on.

All LED screen screens that have entered the air box for more than 3 days are basically of no repair value. Such screens need to be handled with care.

OBVIOUS is one of the leading Manufacturer of outdoor LED screen, LED signage, LED poster, LED floor tiles in China. Whether indoor led screen, outdoor led screen or dance floor led screen, transparent led screen, poster led screen, curved led screen, all have high cost performance, quality and service is our advantage.OBVIOUS is also a high-tech enterprise integrating R & D, manufacturing and sales.certificates are complete.

If you have any questions about the led display, you can contact us for consultation

Protecting Building Occupants from PCBs Once Used in Common Building Materials

Polychlorinated biphenyls (PCBs) were manufactured in the United States from 1929 until their production was banned in 1979. Due to their non-flammability, chemical stability, high boiling point, and electrical insulating properties, PCBs were once used in hundreds of industrial and commercial applications. PCBs are described by the U.S. Environmental Protection Agency (EPA) as belonging to a broad family of man-made organic chemicals known as chlorinated hydrocarbons. Unfortunately, PCBs have also been identifie...

Analysis of stabilizers in electroless nickel baths

Many industrial production processes use electroless nickel (EN) plating to prevent wear and corrosion. In the semiconductor industry, EN plating is an essential production step, where the ENIG (electroless nickel, immersion gold) and ENEPIG (electroless nickel, electroless palladium, immersion gold) processes are used for the PCB production. Stabilizers play an important role in electroless nickel plating solutions as they control the plating rate and prevent uncontrolled plate out (decomposition) of the bath....

ComplianceXL To Support A Leading French Multinational EMS Company With IMDS Reporting And Documentation

Chicago, IL November 15, 2021 – ComplianceXL announced that they signed a contract to support IMDS Reporting and Documentation for a leading French multinational in Electronics Manufacturing Services. This project with help the client streamline their IMDS reporting and documentation capabilities and improve knowledge amongst internal stakeholders. The client is a leading contract manufacturer of electronic products with decades of experience in PCB assembly, PCB design, prototyping & manufacturing...

PCBs in Aging Fluorescent Light Ballasts a Potential Threat to Students and Other Building Occupants

Polychlorinated biphenyls (PCBs) belong to a broad family of man-made organic chemicals known as chlorinated hydrocarbons. They were domestically manufactured from 1929 until manufacturing was banned in 1979 in the United States. PCBs were once used in a number of products due to their non-flammability, chemical stability, high boiling point and electrical insulating properties. In fact, they were used in hundreds of industrial and commercial applications. One area of extensive use was as coolants in hydraulic...

Repurposed Buildings in Puerto Rico and Potential Indoor Exposure Hazards

San Juan, founded by the Spanish 500 years ago, has a rich architectural history and is home to some buildings dating back hundreds of years. Many of these old colonial buildings have had a number of uses over time. While the vast majority of homes and buildings across the islands were built much more recently, a number of them have also been repurposed over time. Indeed, renovating an existing building is often the most cost-effective way to provide for the changing needs of a community. Unfortunately, some...

No comments were found for WHAT SHOULD I DO IF THE OUTDOOR LED SCREEN IS FLOODED. Be the first to comment!

Environmental XPRT is a global environmental industry marketplace and information resource. Online product catalogs, news, articles, events, publications & more.

Environmental XPRT is part of XPRT Media All Rights Reserved. Terms Privacy

Our sites: Agriculture XPRT Energy XPRT Medical XPRT XPRT